John Lewis Dining Tables Resale Value

John Lewis dining tables: price by condition

Seller-declared grades, sterling with an approximate US dollar equivalent at £1 ≈ $1.33 (July 2026). What each grade means.

What holds its value across John Lewis

• Named ranges rather than the entry-level lines, since the range name is the search term and the marker of which tier a piece came from
• Solid wood and properly framed upholstery, which is where the brand’s own-label quality genuinely sits
• Pieces still within their original guarantee period, where you can hand over the receipt and the paperwork
• Complete dining and bedroom sets, which sell as one item for meaningfully more than the pieces separately

What pulls John Lewis resale value down

• Used mattresses, which are the hardest thing in the house to sell — many buyers will not consider one at any price, and disposal is often the honest answer
• Upholstery missing its fire-safety label, which buyers check for under the cushions
• Water rings and heat marks on wooden tops, which are the commonest damage and are always photographed by buyers
• Very large sofas with no measurement given, which fail at the doorway and come back as a cancelled collection

Identifying and dating yours

1. Photograph the label under the furniture showing the range name and the fire-safety information
2. Measure width, depth and height and give the numbers in centimetres, including whether the legs come off
3. Photograph any water rings, heat marks or scuffs directly rather than shooting around them

What lifts any dining table, whatever the label

Solid wood and design pieces hold value; veneered flat-pack tables do not, and the difference is visible at the edges.

• Solid timber construction rather than veneered board
• Recognised mid-century and design makers
• Extending mechanisms that run smoothly
• Matching chairs sold with the table

And what pulls one down

• Water rings and heat marks on the top
• Veneer lifting or chipping at the edges
• Wobbling legs and loose joints
• Flat-pack tables that will not survive another move

Working out what yours is worth

1. Look at the table edge to see whether the grain runs through or stops
2. Measure the length, width and height, extended and closed
3. Photograph the top in daylight so marks are visible

What to state in the listing

• Length, width and height in centimetres, plus extended length if applicable
• How many it comfortably seats
• Solid wood, veneer, laminate or glass
• Whether chairs are included, and how many

Seats, material and length: “Solid Oak Extending Dining Table, Seats 6-8, 180cm”. The number it seats is the primary search, and extending is a strong selling point that should never be buried in the description. If chairs are included, put that in the title too.

Preparing and photographing it

1. Measure the top, and if it extends measure both the closed and extended lengths.
2. Check for wobble, tighten the leg fittings, and look closely at the top surface for water rings, heat marks and scratches.
3. Establish whether it is solid wood, veneer or laminate, and say which — buyers price these very differently.

1. The full table from a corner, showing top and legs together
2. The top surface straight on in daylight, which reveals marks honestly
3. The underside or leg fixings, showing construction
4. Extended, if it extends, and any damage close up

When it sells best, and handing it over

Sells steadily with peaks in spring and early autumn as people move house. Solid wood holds value well and sells all year; laminate moves slowly and cheaply.

Collection only, and mention whether the legs detach, since that decides whether it fits in a car or needs a van. Have the fittings and any allen key ready for the buyer.

What buyers ask

Should I sell a used mattress?

Usually not. Buyers are wary for hygiene reasons and many will not consider one at all. Local recycling or the retailer’s take-back scheme is often the more honest route.

Does the range name really matter?

It does. Buyers search by range because it tells them the tier and the dimensions, and a listing without one is much harder to find.

How much is a John Lewis dining table worth?

Roughly £52 to £368 depending on condition, against £50 to £350 for dining tables generally. The identification points above are what move a listing to the top of that range.

What the fees would take elsewhere

At the mid-range £210 for a John Lewis dining table, against what the commission marketplaces would deduct:

Seller-side rates verified 26 Jul 2026, percentages only — the per-order and processing charges those platforms add are excluded, so the real gap is wider.

Listing is free and there is no commission — read how to sell a dining table for the title, handover and timing, or the general dining table value guide if yours is not a John Lewis.

See also: all John Lewis value guides · value guides by brand · buying a dining table · Furniture · condition grades.