Festool Circular Saws Resale Value

Festool circular saws: price by condition

Seller-declared grades, sterling with an approximate US dollar equivalent at £1 ≈ $1.33 (July 2026). What each grade means.

What holds its value across Festool

• The Domino joiner, which has no direct equivalent from another maker and sells for close to its new price years later
• TS track saws sold with their guide rails, since the rail is what makes the saw usable and is costly to buy separately
• Rotex sanders, which do three jobs in one tool and are the sander most woodworkers specifically want
• Original Systainer cases in the current generation, which stack with the rest of the system and are genuinely part of the value

What pulls Festool resale value down

• A track saw sold without its guide rail, which is a much harder sale than the price difference suggests
• Worn hook-and-loop sanding pads, which are a consumable but one buyers use to judge how hard the tool has worked
• Missing plug-it cables, which are the detachable mains leads Festool uses across the range and are expensive to replace
• Older Systainer generations that do not latch to the current ones, which breaks the stacking system the cases exist for

Identifying and dating yours

1. The serial is on the nameplate on the tool body and Festool’s own service records run from it, which buyers value on an expensive tool
2. Check which Systainer generation the case is, because the latching changed and compatibility with a buyer’s existing stack matters to them
3. Sanders should be photographed pad-down: the condition of the hook-and-loop face is the quickest read on how much work the tool has done

What lifts any circular saw, whatever the label

Saws are judged on the base plate and guard, because a bent plate makes accurate cutting impossible.

• Flat, undamaged base plates
• Retracting guards that spring back reliably
• Recognised trade brands with blade availability
• Rip fence and blade spanner included

And what pulls one down

• Bent base plates, which prevent square cuts
• Sticking or damaged blade guards, a safety issue
• Worn arbor and bearing play
• Missing fences and spanners

Working out what yours is worth

1. Lay the base plate on a flat surface and check for rock
2. Retract the guard and confirm it snaps back
3. Check for play at the blade arbor

What to state in the listing

• Brand, model, blade diameter and maximum cut depth
• Corded wattage, or battery platform and voltage for cordless
• Whether a blade, guide rail, case or dust adapter is included
• Guard function, cable condition and any fault

Brand, blade size and power: “Makita 190mm Circular Saw, 1200W, Corded” or “DeWalt 18V Cordless Circular Saw, Body Only”. Blade diameter is the search. On cordless tools say body only or how many batteries, because it changes the price completely.

Preparing and photographing it

1. Test the lower guard repeatedly. If it sticks open, the saw is unsafe and must not be sold as working.
2. Check the cable for nicks along its whole length, and the plug for damage.
3. Test the depth and bevel adjustments, and note the blade size and whether a blade is included.

1. The saw from the side, whole, on a bench
2. The lower guard in the closed position
3. The base plate and depth and bevel adjusters
4. The cable and plug, plus the rating plate and any damage

When it sells best, and handing it over

Lifts in spring as projects start and before Christmas. Trade brands sell within days; unbranded tools compete on price alone.

Heavy and awkward. Remove the blade or ensure the guard is secured for transport, and box it properly — an exposed blade in a parcel is dangerous to whoever handles it.

What buyers ask

Why does used Festool cost so much?

The tools are expensive new, the dust extraction and guide systems are closed, and demand from woodworkers is steady. That combination keeps second-hand prices high.

Should I include the Systainer with the tool?

Yes. The case is part of the system rather than packaging, and a tool sold without its Systainer sells for noticeably less than one sold with the correct case.

How much is a Festool circular saw worth?

Roughly £46 to £279 depending on condition, against £30 to £180 for circular saws generally. The identification points above are what move a listing to the top of that range.

What the fees would take elsewhere

At the mid-range £162 for a Festool circular saw, against what the commission marketplaces would deduct:

Seller-side rates verified 26 Jul 2026, percentages only — the per-order and processing charges those platforms add are excluded, so the real gap is wider.

Listing is free and there is no commission — read how to sell a circular saw for the title, handover and timing, or the general circular saw value guide if yours is not a Festool.

See also: all Festool value guides · value guides by brand · buying a circular saw · Tools & DIY · condition grades.