IKEA Dining Tables Resale Value

IKEA dining tables: price by condition

Seller-declared grades, sterling with an approximate US dollar equivalent at £1 ≈ $1.33 (July 2026). What each grade means.

What holds its value across IKEA

• Discontinued designs with a following, which trade well above their original price because the only way to buy one now is second hand
• Solid wood ranges such as IVAR and HEMNES rather than particleboard, which survive a dismantle and rebuild intact where veneered chipboard does not
• Complete fixings and the assembly instructions, without which many pieces simply cannot be rebuilt and are worth scrap value
• Current ranges still in stores, because a buyer can price-compare against new and buy matching pieces to go with it

What pulls IKEA resale value down

• Blown or swollen particleboard, usually from a spill or a damp wall, which has no repair and will not survive being moved
• Missing cam locks and dowels, which can make an otherwise sound item unbuildable and are fiddly to source in the right size
• Items dismantled and reassembled several times, where the fixing holes have gone soft and the joints no longer pull tight
• Anything too large to move without a van, which narrows the buyer pool to people within a short drive

Identifying and dating yours

1. The range name is the searchable term — BILLY, MALM, KALLAX, POÄNG — and buyers search that rather than ‘bookcase’ or ‘shelving unit’, so it belongs in the title
2. The article number is printed on the assembly instructions and usually on a sticker on the underside or back panel, and it identifies the exact size and finish variant among several that share a range name
3. Say whether you still have the instructions and the fixings bag; the instructions are downloadable free, the fixings are not, and buyers ask about both before travelling

What lifts any dining table, whatever the label

Solid wood and design pieces hold value; veneered flat-pack tables do not, and the difference is visible at the edges.

• Solid timber construction rather than veneered board
• Recognised mid-century and design makers
• Extending mechanisms that run smoothly
• Matching chairs sold with the table

And what pulls one down

• Water rings and heat marks on the top
• Veneer lifting or chipping at the edges
• Wobbling legs and loose joints
• Flat-pack tables that will not survive another move

Working out what yours is worth

1. Look at the table edge to see whether the grain runs through or stops
2. Measure the length, width and height, extended and closed
3. Photograph the top in daylight so marks are visible

What to state in the listing

• Length, width and height in centimetres, plus extended length if applicable
• How many it comfortably seats
• Solid wood, veneer, laminate or glass
• Whether chairs are included, and how many

Seats, material and length: “Solid Oak Extending Dining Table, Seats 6-8, 180cm”. The number it seats is the primary search, and extending is a strong selling point that should never be buried in the description. If chairs are included, put that in the title too.

Preparing and photographing it

1. Measure the top, and if it extends measure both the closed and extended lengths.
2. Check for wobble, tighten the leg fittings, and look closely at the top surface for water rings, heat marks and scratches.
3. Establish whether it is solid wood, veneer or laminate, and say which — buyers price these very differently.

1. The full table from a corner, showing top and legs together
2. The top surface straight on in daylight, which reveals marks honestly
3. The underside or leg fixings, showing construction
4. Extended, if it extends, and any damage close up

When it sells best, and handing it over

Sells steadily with peaks in spring and early autumn as people move house. Solid wood holds value well and sells all year; laminate moves slowly and cheaply.

Collection only, and mention whether the legs detach, since that decides whether it fits in a car or needs a van. Have the fittings and any allen key ready for the buyer.

What buyers ask

Is used IKEA furniture worth selling?

Solid wood ranges and discontinued designs sell well. Particleboard that has already been moved once is usually not worth the effort.

Do I need the original fixings?

Effectively yes for flat-pack. Missing cam locks and dowels are the commonest reason a second-hand IKEA piece cannot be rebuilt.

How much is an IKEA dining table worth?

Roughly £40 to £280 depending on condition, against £50 to £350 for dining tables generally. The identification points above are what move a listing to the top of that range.

What the fees would take elsewhere

At the mid-range £160 for an IKEA dining table, against what the commission marketplaces would deduct:

Seller-side rates verified 26 Jul 2026, percentages only — the per-order and processing charges those platforms add are excluded, so the real gap is wider.

Listing is free and there is no commission — read how to sell a dining table for the title, handover and timing, or the general dining table value guide if yours is not an IKEA.

See also: all IKEA value guides · value guides by brand · buying a dining table · Furniture · condition grades.