Barbour Gloves Resale Value

Barbour gloves: price by condition

Seller-declared grades, sterling with an approximate US dollar equivalent at £1 ≈ $1.33 (July 2026). What each grade means.

What holds its value across Barbour

• The Bedale, Beaufort and Border, the three classic waxed jackets, which buyers search by name and which have been made largely unchanged for decades
• Vintage jackets identified by the number of crests on the label, which collectors use to date a coat and price it accordingly
• Barbour International pieces, particularly the Steve McQueen line, which have a following separate from the country range
• Anything with the original tartan lining intact, since a relined or replaced lining is immediately obvious

What pulls Barbour resale value down

• Dried-out wax that has gone stiff and cracked at the folds — though this is reversible with a re-wax and is worth doing before listing rather than discounting for
• Torn or replaced tartan lining, which is expensive to put right and is the first thing a buyer opens the jacket to check
• Worn corduroy collars, the standard wear point, which are noticeable in every photograph taken from the front
• Rusted or replaced zips and studs, which on a jacket this old is a real repair rather than a cosmetic one

Identifying and dating yours

1. The interior label carries one, two or three crests depending on the era, and this is how buyers date a jacket — photograph it flat
2. The size is on the same label in inches rather than S to XL, so state the UK equivalent and the flat chest measurement
3. Say plainly when the jacket was last re-waxed; buyers ask, and a recently waxed coat sells noticeably faster than one that has not been

What lifts any gloves, whatever the label

Gloves sell on material and whether they are a genuine pair, and leather condition is what buyers judge.

• Leather and cashmere-lined gloves
• Recognised makers with a following
• Supple leather with no cracking
• Complete matched pairs

And what pulls one down

• Cracked or dried leather at the knuckles
• Split seams between the fingers
• Odd single gloves
• Thin synthetic gloves

Working out what yours is worth

1. Flex the leather at the knuckles for cracking
2. Check every seam between the fingers
3. Measure the hand size or state the marked size

What to state in the listing

• Size, and hand width measured flat
• Outer material and lining material
• Whether they are touchscreen compatible
• Condition of fingertips, seams and lining

Material, size and features: “Leather Gloves, Size M, Cashmere Lined, Touchscreen”. Touchscreen compatibility is a genuine search that is almost never stated. Leather, wool and synthetic are quite different price brackets.

Preparing and photographing it

1. Check every fingertip and the seams between the fingers, which is where gloves wear through first.
2. Confirm they are a genuine pair and both are the same size, and check any lining is intact.
3. Test touchscreen compatibility if the fingertips have conductive thread, and say what you find.

1. Both gloves laid flat together, palms down
2. Both palms up, showing wear
3. The fingertips and seams close up
4. The label with size and composition, plus any hole, split seam or worn patch

When it sells best, and handing it over

October to February is the market, with a Christmas gifting peak. Leather gloves hold value best; knitted gloves are best bundled.

Cheapest possible postage. Send them as a flat pair in a padded envelope, and check both are present before sealing — single gloves are a classic packing mistake.

What buyers ask

Is a scruffy Barbour still worth selling?

Usually yes, and more than people expect. These jackets are designed to be re-waxed and repaired rather than replaced, so a tired but sound one still has a buyer. A torn lining or a rusted zip matters far more than tired wax.

How do I date a Barbour jacket?

By the crests on the interior label. One, two or three crests correspond to different eras, and collectors use that before anything else. Photograph the label rather than describing it.

How much are Barbour gloves worth?

Roughly £5 to £30 depending on condition, against £4 to £22 for gloves generally. The identification points above are what move a listing to the top of that range.

What the fees would take elsewhere

At the mid-range £17 for Barbour gloves, against what the commission marketplaces would deduct:

Seller-side rates verified 26 Jul 2026, percentages only — the per-order and processing charges those platforms add are excluded, so the real gap is wider.

Listing is free and there is no commission — read how to sell gloves for the title, handover and timing, or the general gloves value guide if yours is not a Barbour.

See also: all Barbour value guides · value guides by brand · buying gloves · Clothing · condition grades.