The short version
- Typical range: £20 – £110
- Biggest single factor: condition — see the table below
- Category: Cameras & Photography
- Cost to sell on WishThrift: nothing, at any price
What a used camera flash is worth by condition
Condition does more to the price than anything else. These figures are worked from the top of the range for camera flashs, so treat them as a starting point and adjust for the specifics of yours.
| Condition | Typical price | What it means |
|---|---|---|
| New with Tags | £110 | Unused, tags or seals intact |
| Like New | £93 | Barely used, no visible wear |
| Good | £71 | Light signs of use, complete and working |
| Fair | £49 | Heavily used, or a described fault or missing part |
| For Parts | £27 | Not working or incomplete, sold as seen |
These are the five grades WishThrift listings use, and sellers set the grade themselves — see what each condition grade means. Figures are shown in pounds as a reference point. On WishThrift prices display in your own currency, and sellers set their own asking price.
What raises the value of a camera flash
- Full communication with current camera systems
- Low flash counts with consistent output
- Recognised makers and third-party specialists
- Diffusers, stands and cases included
What lowers it
- Discoloured tubes indicating heavy use
- Inconsistent output between shots
- Corroded battery compartments
- Units for discontinued camera systems
How to work out what yours is worth
- Fire it repeatedly and check output stays consistent
- Open the battery compartment and check for corrosion
- State which camera system it supports
Once you have those three answers you can place your own camera flash on the table above with reasonable confidence. If it sits between two rows, price it toward the lower one — items priced honestly sell faster than items priced hopefully.
Ready to sell it? Listing on WishThrift is free, there is no commission, and you keep the full amount you agree with the buyer — see how selling works or create a free account.
Frequently asked questions
What should I check on a used flashgun?
Fire it repeatedly and watch for consistent output and recycle time. Inconsistency means the capacitor or tube is tiring.
Does the camera system matter?
Enormously. Flash communication is system-specific, so state clearly which mount and system it supports.
Is a discoloured tube a problem?
It indicates heavy use and output may have dropped. Mention it, since experienced buyers look for it.
More value guides: cameras & photography guides · all value guides · browse live cameras & photography listings.