The short version
- Typical range: £25 – £140
- Biggest single factor: condition — see the table below
- Category: Tools & DIY
- Cost to sell on WishThrift: nothing, at any price
What a used tile cutter is worth by condition
Condition does more to the price than anything else. These figures are worked from the top of the range for tile cutters, so treat them as a starting point and adjust for the specifics of yours.
| Condition | Typical price | What it means |
|---|---|---|
| New with Tags | £140 | Unused, tags or seals intact |
| Like New | £119 | Barely used, no visible wear |
| Good | £91 | Light signs of use, complete and working |
| Fair | £63 | Heavily used, or a described fault or missing part |
| For Parts | £35 | Not working or incomplete, sold as seen |
These are the five grades WishThrift listings use, and sellers set the grade themselves — see what each condition grade means. Figures are shown in pounds as a reference point. On WishThrift prices display in your own currency, and sellers set their own asking price.
What raises the value of a tile cutter
- Straight, undamaged rails and guides
- Sharp scoring wheels
- Wet cutters with working pumps
- Recognised brands with blades available
What lowers it
- Bent rails causing off-square cuts
- Blunt scoring wheels
- Failed water pumps on wet cutters
- Missing guides and fences
How to work out what yours is worth
- Check the rails are straight and the slide runs smoothly
- Inspect the scoring wheel for flats
- On wet cutters, run the pump
Once you have those three answers you can place your own tile cutter on the table above with reasonable confidence. If it sits between two rows, price it toward the lower one — items priced honestly sell faster than items priced hopefully.
Ready to sell it? Listing on WishThrift is free, there is no commission, and you keep the full amount you agree with the buyer — see how selling works or create a free account.
Frequently asked questions
Are tile cutters worth buying used?
Yes, and they are good value, because most are bought for a single job and barely used.
What wears out?
The scoring wheel, which blunts and produces ragged breaks. Replacements are cheap and worth fitting.
Do wet cutters need testing?
Yes, run the pump. A failed pump is the most common fault and makes the cutter unusable for its purpose.
More value guides: tools & diy guides · all value guides · browse live tools & diy listings.