Used angle grinders in Richmond, British Columbia typically sell for C$38 to C$225 (about $27 to $160). Angle grinders are cheap, common and genuinely dangerous, so the guard is the whole story — never sell one with the guard removed, however common that is.
Selling an angle grinder in Richmond
Airport and logistics work turns over on shift and contract cycles, and a highly international population means households are set up and cleared on international moves rather than local ones — which usually means everything goes at once.
The city is completely flat, which makes it one of the easiest places in the region to move anything, and the dyke paths are genuinely useful for cycling. The rapid transit line to the airport is the obvious landmark for a small handover.
The whole city sits at or near sea level behind dykes, so ask whether anything stored at ground level has been damp. It is a normal question here and honest sellers will answer it directly.
Richmond, in British Columbia, has around 210,000 people, which means a smaller local market, so price sensibly and expect the right buyer to be willing to travel a little. Vancouver, Surrey and Burnaby are close enough that a buyer there may well make the trip for the right thing.
Handing it over in Richmond
Interac e-Transfer is the norm and is instant and traceable, which suits a private sale well. It is what most buyers will suggest before anything else.
Sell your Angle Grinder in Richmond, British Columbia
Listing is free and there is no commission and no buyer fee, so the price you agree is the price you keep. Most listings take about a minute to put up.
What angle grinders are worth
What lifts the price
- Smooth bearings with no wobble at the spindle
- Side handle and spanner included
What pulls it down
- Spindle wobble from worn bearings
- Motors clogged with metal dust
Working out what yours is worth
- Spin the spindle by hand feeling for play
- Confirm the guard is present and adjusts
Getting it ready
- Fit the guard if it has been removed and confirm it locks in position. A grinder without a guard should not be sold for use.
- Check the cable and plug, test the spindle lock, and listen for bearing noise when it runs.
Photograph
- The cable and plug, and the rating plate
- The side handle, spanner and accessories, plus any crack or damage
Put in the description
- Bearing condition and whether it runs smoothly
- Cable and plug condition
Brand, disc size and power: “Bosch 115mm Angle Grinder, 900W, with Guard and Handle”. Disc diameter is the search — 115mm, 125mm and 230mm are quite different tools. Say whether the guard and side handle are present, because a grinder missing either is worth much less.
Listing is free and there is no selling fee, so the whole amount the buyer pays stays with you. You and the buyer agree the handover between yourselves.
Same region (British Columbia)
Common questions
Where can I sell an angle grinder in Richmond?
List it free on WishThrift and deal with the buyer direct. The city is completely flat, which makes it one of the easiest places in the region to move anything, and the dyke paths are genuinely useful for cycling. The rapid transit line to the airport is the obvious landmark for a small handover.
Does it run smoothly?
Run it briefly and listen. Bearing whine and brush arcing are the usual faults and they are audible immediately.
How much is an angle grinder worth in Richmond?
Most used angle grinders change hands for C$38 to C$225 (about $27 to $160). Condition and completeness move that figure more than anything else.
More: selling an angle grinder across Canada, what angle grinders are worth, everything second hand in Richmond, or Tools & DIY in Richmond.
Guide range converted from sterling at the 2 August 2026 rate, not a quote — sellers set their own price.