♻️ pre-loved items available — growing daily. How it works →
WishThrift

Dr Martens Work Boots Resale Value

Used Dr Martens work boots are typically worth £29 to £126 (approximately $39 to $168), against £25 to £110 for work boots generally. Dr Martens are resoleable, which puts a floor under a worn pair that most footwear does not have — and makes where they were made the biggest single price factor.

Dr Martens work boots: price by condition

ConditionTypical
New with Tags£126 (~$168)
Like New£107 (~$143)
Good£82 (~$109)
Fair£57 (~$76)
For Parts£32 (~$42)

Seller-declared grades, sterling with an approximate US dollar equivalent at £1 ≈ $1.33 (July 2026). What each grade means.

What holds its value across Dr Martens

  • Made in England pairs, stamped on the heel, which are a separate and much stronger market
  • The 1460 eight-hole and 1461 shoe, the two silhouettes with constant demand
  • Vintage and discontinued leathers and patterns
  • Boots that have been resoled properly, which is a selling point rather than a defect

What pulls Dr Martens resale value down

  • Cracked or split uppers at the flex point, which resoling does not fix
  • Separated welts, the failure that does end a pair
  • Heavy scuffing on patent leather, which cannot be polished out
  • Missing original laces on collectable pairs

Identifying and dating yours

  1. The heel is stamped with the country of manufacture — ‘Made in England’ is the one buyers search for
  2. The style code is printed on the inner tongue label with the size
  3. Genuine yellow welt stitching is even and the sole is heat-sealed, not glued

What lifts any work boots, whatever the label

Work boots are bought to be used, so buyers check safety features and sole condition rather than cosmetics.

  • Intact safety toe caps and midsole protection
  • Deep, unworn sole tread
  • Recognised workwear brands with a following
  • Waterproof membranes still functioning

And what pulls one down

  • Worn-through soles offering no grip
  • Compromised toe caps after a heavy impact
  • Split uppers at the flex point
  • Boots past their safety certification life

Working out what yours is worth

  1. Photograph the soles showing tread depth
  2. Check the safety rating stamped inside the tongue
  3. Flex the upper and look for splitting

What to state in the listing

  • Size as marked, with UK and EU equivalents, and the width fitting if given
  • Safety rating code as marked, and whether the toe cap is steel or composite
  • Whether the boot has a midsole plate, is waterproof, or is electrical-hazard rated
  • Tread depth and overall wear, given honestly

Brand, safety rating and size: “Dr Martens Steel Toe Safety Boots, S3, UK 10” or “Waterproof Work Boots, Composite Toe, EU 44”. Tradespeople search the rating and the toe type directly, and composite versus steel matters to anyone going through a metal detector at work.

Preparing and photographing it

  1. Find the safety marking inside the tongue or on the label — codes such as S1, S3 or SB tell buyers exactly what protection the boot has.
  2. Check the toe cap area for impact damage and the sole for separation at the welt.
  3. Clean them properly and check the lacing hardware and the inner lining at the heel, which wears through with heavy use.
  1. The pair side on, cleaned, standing
  2. Both soles, showing tread depth and any separation
  3. The safety marking inside the tongue, photographed legibly
  4. The toe area, the heel lining, and any split, scuff or worn hardware

When it sells best, and handing it over

Steady all year, with a lift in autumn as outdoor work gets wetter. Common trade sizes in recognised brands sell within a fortnight.

Heavy, so weigh them before quoting postage. Local collection often makes more sense for a cheaper pair where the postage would be a large share of the price.

What buyers ask

Are Made in England Dr Martens worth more?

Considerably, and it is stamped on the heel. It is the first thing a serious buyer looks for, so photograph it.

Can I sell Dr Martens that need resoling?

Yes — they are built to be resoled and buyers know it. Cracked uppers and a separated welt are the damage that actually ends a pair.

How much are Dr Martens work boots worth?

Roughly £29 to £126 depending on condition, against £25 to £110 for work boots generally. The identification points above are what move a listing to the top of that range.

What the fees would take elsewhere

At the mid-range £77 for Dr Martens work boots, against what the commission marketplaces would deduct:

PlatformFeeYou keep
Poshmark−£15£62
eBay−£10£67
Mercari−£8£69
Etsy−£5£72
WishThrift−£0£77

Seller-side rates verified 26 Jul 2026, percentages only — the per-order and processing charges those platforms add are excluded, so the real gap is wider.

Listing is free and there is no commission — read how to sell work boots for the title, handover and timing, or the general work boots value guide if yours is not a Dr Martens.

See also: all Dr Martens value guides · value guides by brand · buying work boots · Shoes & Footwear · condition grades.