Habitat Dining Tables Resale Value

Habitat dining tables: price by condition

Seller-declared grades, sterling with an approximate US dollar equivalent at £1 ≈ $1.33 (July 2026). What each grade means.

What holds its value across Habitat

• Earlier design-led pieces from the brand’s original era, which collectors actively search for and which are priced quite separately
• Solid wood rather than veneered or foil-wrapped board, which is what survives a house move and a repair
• Designer-attributed pieces where the designer is named on the label or in the original listing
• Lighting and smaller homeware, which is easy for a buyer to collect and therefore clears far faster than a sofa

What pulls Habitat resale value down

• Chipped foil-wrapped or veneered edges, which cannot be repaired invisibly and are the usual failure on flat-pack ranges
• Upholstery with no fire-safety label under the cushion, which UK buyers look for and many will not buy without
• Pieces that have been dismantled and rebuilt several times, where the fixings have loosened in the board
• Sun-bleached fabric on one side only, which is very obvious once the piece is in a different room

Identifying and dating yours

1. Photograph the label under the seat or inside a drawer, which carries the range name and the fire-safety information
2. Give the exact width, depth and height in centimetres — furniture sells or fails on whether it fits
3. Say whether the piece is solid wood or veneered board, because that is the single biggest factor in what it is worth

What lifts any dining table, whatever the label

Solid wood and design pieces hold value; veneered flat-pack tables do not, and the difference is visible at the edges.

• Solid timber construction rather than veneered board
• Recognised mid-century and design makers
• Extending mechanisms that run smoothly
• Matching chairs sold with the table

And what pulls one down

• Water rings and heat marks on the top
• Veneer lifting or chipping at the edges
• Wobbling legs and loose joints
• Flat-pack tables that will not survive another move

Working out what yours is worth

1. Look at the table edge to see whether the grain runs through or stops
2. Measure the length, width and height, extended and closed
3. Photograph the top in daylight so marks are visible

What to state in the listing

• Length, width and height in centimetres, plus extended length if applicable
• How many it comfortably seats
• Solid wood, veneer, laminate or glass
• Whether chairs are included, and how many

Seats, material and length: “Solid Oak Extending Dining Table, Seats 6-8, 180cm”. The number it seats is the primary search, and extending is a strong selling point that should never be buried in the description. If chairs are included, put that in the title too.

Preparing and photographing it

1. Measure the top, and if it extends measure both the closed and extended lengths.
2. Check for wobble, tighten the leg fittings, and look closely at the top surface for water rings, heat marks and scratches.
3. Establish whether it is solid wood, veneer or laminate, and say which — buyers price these very differently.

1. The full table from a corner, showing top and legs together
2. The top surface straight on in daylight, which reveals marks honestly
3. The underside or leg fixings, showing construction
4. Extended, if it extends, and any damage close up

When it sells best, and handing it over

Sells steadily with peaks in spring and early autumn as people move house. Solid wood holds value well and sells all year; laminate moves slowly and cheaply.

Collection only, and mention whether the legs detach, since that decides whether it fits in a car or needs a van. Have the fittings and any allen key ready for the buyer.

What buyers ask

Is older Habitat worth more than the current range?

Pieces from the original design-led era often are, particularly designer-attributed ones. The current high-street range prices as ordinary good mid-market furniture.

Why does the fire label matter?

UK upholstered furniture carries a permanent fire-safety label, and buyers look for it under the cushions. Photograph it — its absence puts people off immediately.

How much is a Habitat dining table worth?

Roughly £50 to £350 depending on condition, against £50 to £350 for dining tables generally. The identification points above are what move a listing to the top of that range.

What the fees would take elsewhere

At the mid-range £200 for a Habitat dining table, against what the commission marketplaces would deduct:

Seller-side rates verified 26 Jul 2026, percentages only — the per-order and processing charges those platforms add are excluded, so the real gap is wider.

Listing is free and there is no commission — read how to sell a dining table for the title, handover and timing, or the general dining table value guide if yours is not a Habitat.

See also: all Habitat value guides · value guides by brand · buying a dining table · Furniture · condition grades.