Used angle grinders in Phoenix typically sell for $27 to $160. Angle grinders are cheap, common and genuinely dangerous, so the guard is the whole story — never sell one with the guard removed, however common that is.
Selling an angle grinder in Phoenix
Seasonal residents arrive for the winter and leave in spring, and departures put furniture and sports equipment onto the market in a concentrated burst each year. Sun damage is the check worth making on anything that has lived outside.
Between June and September, meetings happen early in the morning or after dark for obvious reasons. The city is flat and parking is plentiful, so collecting large items is easy once the temperature allows it.
Sun is the thing that kills goods here. Check plastics, upholstery and rubber on anything that lived outdoors, and expect fading and brittleness even on items that were only a couple of summers old.
Phoenix, in Arizona, has around 1.6 million people, which means a deep enough buyer pool that most things sell without having to travel far to hand them over. Tucson, Mesa and Chandler are close enough that a buyer there may well make the trip for the right thing.
Handing it over in Phoenix
Demand rises through the spring cleaning season and again around college move-in in August, when furniture and small appliances move fastest.
What angle grinders are worth
What lifts the price
- Smooth bearings with no wobble at the spindle
- Side handle and spanner included
What pulls it down
- Spindle wobble from worn bearings
- Failing switches that stick on
Working out what yours is worth
- Spin the spindle by hand feeling for play
- Test the switch releases cleanly
Getting it ready
- Fit the guard if it has been removed and confirm it locks in position. A grinder without a guard should not be sold for use.
- Check the cable and plug, test the spindle lock, and listen for bearing noise when it runs.
Photograph
- The grinder from the side with the guard fitted
- The spindle, flange and guard mounting
Put in the description
- Brand, model, disc diameter and wattage or battery voltage
- Whether the guard, side handle and spanner are included
Brand, disc size and power: “Bosch 115mm Angle Grinder, 900W, with Guard and Handle”. Disc diameter is the search — 115mm, 125mm and 230mm are quite different tools. Say whether the guard and side handle are present, because a grinder missing either is worth much less.
Listing is free and there is no selling fee, so the whole amount the buyer pays stays with you. You and the buyer agree the handover between yourselves.
Same region (Arizona)
Common questions
Where can I sell an angle grinder in Phoenix?
List it free on WishThrift and deal with the buyer direct. Between June and September, meetings happen early in the morning or after dark for obvious reasons. The city is flat and parking is plentiful, so collecting large items is easy once the temperature allows it.
Does it run smoothly?
Run it briefly and listen. Bearing whine and brush arcing are the usual faults and they are audible immediately.
How much is an angle grinder worth in Phoenix?
Most used angle grinders change hands for $27 to $160. Condition and completeness move that figure more than anything else.
More: selling an angle grinder across the United States, what angle grinders are worth, everything second hand in Phoenix, or Tools & DIY in Phoenix.
Guide range converted from sterling at the 2 August 2026 rate, not a quote — sellers set their own price.